Make every piece of marine data work with the rest.
WaveBridge DAX-200 takes four NMEA 0183 inputs and feeds three outputs, converting, filtering and routing each sentence the way the installation needs. Ethernet, CAN bus and USB-C are on board, and every setting is made in the browser.
One point where the ship's data meets.
Every source on one connection point
Position, heading, wind and speed arrive on the DAX-200's inputs, and the equipment that needs them is fed from there rather than wired source by source.
Filtered and sent where it belongs
Sentences are selected as they come in and routed to the outputs that should carry them, so each listener receives only the messages it understands.
Old and new, side by side
Existing navigation equipment keeps working alongside newly fitted devices through the supported formats, and the whole arrangement is configured and watched from a browser.
Key Benefits
Four NMEA 0183 inputs and three NMEA 0183 outputs.
Ethernet, CAN bus and USB-C connectivity.
Web configuration, monitoring and NMEA sentence handling.
Configurable conversion and routing modes with isolated serial ports.
Data that works together
Convert, filter and route marine data.
WaveBridge DAX-200 provides configurable marine data exchange between connected instruments and receiving systems. Four NMEA 0183 inputs, three outputs and additional Ethernet, CAN bus and USB-C connections support integration. Its web interface enables monitoring, sentence filtering and routing for compatible equipment.
System Specifications
NMEA 0183 inputs | 4
NMEA 0183 outputs | 3
Other connections | Ethernet, CAN bus and USB-C
Serial ports | Galvanically isolated
Configuration | Web interface for configuration and data monitoring
Interfaces & Integration
Sentence handling | Filtering, field editing, talker-ID adjustment and routing
DAX modes | Source selection, multiplexing and application-specific conversion
Formats | Supported heading and speed-log formats matched to the installation
Typical use | Bridge retrofits, sensor integration and configured heading or speed-data interfaces
WaveBridge DAX-200 System Includes
1 × Data Exchange Unit
WaveBridge DAX-200
1 × Mounting Bracket Set
Stainless steel, with fixings
1 × Terminal Connector Set
Pluggable screw terminals for all inputs and outputs
1 × USB-C Cable
Configuration and software updates
1 × Power Cable
24 V DC, fused
Also supplied
Quick-start card, digital-manual QR card and the installation manual
Discuss Your Interface Requirements
Bridge retrofits, sensor integration and configured heading or speed-data interfaces.
